noob5,000,000's 1986 Mazda RX7, the clean one from Texas
-
- Master Standardshifter
- Posts: 11616
- Joined: Mon Mar 16, 2009 3:44 pm
- Cars: '08 Jeep Liberty
- Location: Greater Detroit Area
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
^ I can't remember - was he like Garth, or like Wayne?
'08 Jeep Liberty 6-Speed MT - "Last of the Mohicans"
-
- Master Standardshifter
- Posts: 9380
- Joined: Wed Nov 15, 2006 10:57 pm
- Cars: 1986 Mazda RX-7 x2
- Location: Sterling Heights, Michigan
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
So, I actually did end up assembling the engine (mostly). I got the front cover and all the stuff under it (oil pump, counter weight, etc) installed. I haven't put the manifolds on yet since I want to have my injectors checked out before I install them.
I also decided to repaint the engine bay. I've found a spray paint color combo that matches better than what I had on there. I got the current paint mostly removed with the help of paint stripper, a wire brush, some rags, and lots of sweat. It's about 80% done.
I've also decided that I am going to swap brake setups between cars. The Texas car came with 4-lug hubs and single-piston front calipers, while the rusty car has 5-lug hubs and 4-piston front brakes (and vented rear rotors). Having 4-piston brakes will be nice, and having 5-lug hubs will open up many more wheel choices. I'll likely get a set of Crown Vic wheels eventually, like so:
I also decided to repaint the engine bay. I've found a spray paint color combo that matches better than what I had on there. I got the current paint mostly removed with the help of paint stripper, a wire brush, some rags, and lots of sweat. It's about 80% done.
I've also decided that I am going to swap brake setups between cars. The Texas car came with 4-lug hubs and single-piston front calipers, while the rusty car has 5-lug hubs and 4-piston front brakes (and vented rear rotors). Having 4-piston brakes will be nice, and having 5-lug hubs will open up many more wheel choices. I'll likely get a set of Crown Vic wheels eventually, like so:
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
-
- Master Standardshifter
- Posts: 6927
- Joined: Sun Apr 20, 2008 5:51 pm
- Cars: 1994 Corolla, 1990 Miata
- Location: Chicago, IL
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
Sexy. Can't wait to see it all dolled up.
- theholycow
- Master Standardshifter
- Posts: 16021
- Joined: Tue Jun 24, 2008 1:36 pm
- Cars: '80 Buick LeSabre 4.1 5MT
- Location: Glocester, RI
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
I've always liked that style of wheels.
1980 Buick LeSabre 4.1L 5MT
Put your car in your sig!
Learn to launch/FAQs/lugging/misused terms: meta-sig
Put your car in your sig!
Learn to launch/FAQs/lugging/misused terms: meta-sig
watkins wrote:Humans have rear-biased AWD. Cows have 4WD
-
- Master Standardshifter
- Posts: 9380
- Joined: Wed Nov 15, 2006 10:57 pm
- Cars: 1986 Mazda RX-7 x2
- Location: Sterling Heights, Michigan
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
Oh yeah, the water pump housing and water pump are also installed.
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
In my opinion, they tend to look better on other cars than the original vehicle they were on. Sometimes I do not understand manufacturers choosing wheels for vehicles. Like the cheap, basic Scion hubcaps.. fugly.theholycow wrote:I've always liked that style of wheels.
'15 Mazda 3 iSport Hatch 6MT
'11 Ford Fiesta Hatchback SE 5MT
'14 Giant Escape City 24MT
'97 Honda Civic EX 4AT - Retired @ 184,001 mi
For Pony!
'11 Ford Fiesta Hatchback SE 5MT
'14 Giant Escape City 24MT
'97 Honda Civic EX 4AT - Retired @ 184,001 mi
For Pony!
-
- Master Standardshifter
- Posts: 9380
- Joined: Wed Nov 15, 2006 10:57 pm
- Cars: 1986 Mazda RX-7 x2
- Location: Sterling Heights, Michigan
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
The death of my other car comes with a silver lining, I will now be able to extract some key parts from it for this car.
I no longer need to buy:
- Alternator
- Brake master cylinder
- Clutch master cylinder
- Clutch slave cylinder
Theoretically, the only major parts I'll have to buy now are:
- Bushing kit (front and rear control arms, sway bar, ball joint boots)
- Engine mounts
- Transmission mounts
- Small stuff (hardware, etc)
That will get it running, to get it completely complete:
- 2 Summit RPM switches to rig up the 6pi and VDI systems
- probably some other stuff that I'll remember later
I no longer need to buy:
- Alternator
- Brake master cylinder
- Clutch master cylinder
- Clutch slave cylinder
Theoretically, the only major parts I'll have to buy now are:
- Bushing kit (front and rear control arms, sway bar, ball joint boots)
- Engine mounts
- Transmission mounts
- Small stuff (hardware, etc)
That will get it running, to get it completely complete:
- 2 Summit RPM switches to rig up the 6pi and VDI systems
- probably some other stuff that I'll remember later
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
-
- Master Standardshifter
- Posts: 9380
- Joined: Wed Nov 15, 2006 10:57 pm
- Cars: 1986 Mazda RX-7 x2
- Location: Sterling Heights, Michigan
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
All the 5-lug parts have been harvested from the recently-blown rusty car. The aluminum 4-piston calipers are lighter than the single-piston ones (steel, iron?) .
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
-
- Master Standardshifter
- Posts: 9380
- Joined: Wed Nov 15, 2006 10:57 pm
- Cars: 1986 Mazda RX-7 x2
- Location: Sterling Heights, Michigan
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
It seems like I'm going backwards . I removed some more stuff from this car tonight. The entire interior from the belt line up, to be exact (everything else is gone already). The car officially has no interior at the moment. My reason for tearing it even further apart was to apply sound deadening to the underside of the roof, and the back of any large interior panels. I want no rattles. Hopefully I can get some more time to finish sound deadening the interior so I can start putting it back together.
Also, the paint in the engine bay is about 88% stripped, soon I'll be able to paint it and start putting it back together too.
Just in time for winter .
Also, the paint in the engine bay is about 88% stripped, soon I'll be able to paint it and start putting it back together too.
Just in time for winter .
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
- potownrob
- Master Standardshifter
- Posts: 7833
- Joined: Sun Jun 05, 2005 11:35 pm
- Cars: '17 CX-5 GT
- Location: Dutchess County
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
do you have a winter ride or is this it??noob5,000,000 wrote: Just in time for winter .
ClutchFork wrote:...So I started carrying a stick of firewood with me and that became my parking brake.
-
- Master Standardshifter
- Posts: 9380
- Joined: Wed Nov 15, 2006 10:57 pm
- Cars: 1986 Mazda RX-7 x2
- Location: Sterling Heights, Michigan
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
I don't have a winter ride, but this car definitely won't be it. My dad and I will have to continue to split a car (slushbox Focus) until his Jeep gets put back together. It sucks, even if I finish this car early in the winter, I'll still have to wait until spring to drive it again. They salt the roads very heavily around here, and I flat-out refuse to expose this car to it after dealing with my rusty FC.
1986 Mazda RX-7 sport - slowly returning to the Earth
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
1986 Mazda RX-7 base - Project car, ???, In pieces, turbo parts around.
- theholycow
- Master Standardshifter
- Posts: 16021
- Joined: Tue Jun 24, 2008 1:36 pm
- Cars: '80 Buick LeSabre 4.1 5MT
- Location: Glocester, RI
- Contact:
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
noob5,000,000 wrote:Just in time for winter .
1980 Buick LeSabre 4.1L 5MT
Put your car in your sig!
Learn to launch/FAQs/lugging/misused terms: meta-sig
Put your car in your sig!
Learn to launch/FAQs/lugging/misused terms: meta-sig
watkins wrote:Humans have rear-biased AWD. Cows have 4WD
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
Squint wrote:In my opinion, they tend to look better on other cars than the original vehicle they were on. Sometimes I do not understand manufacturers choosing wheels for vehicles. Like the cheap, basic Scion hubcaps.. fugly.theholycow wrote:I've always liked that style of wheels.
The wheel choice is the least of the worries on that car lol.
But yeah, sometimes I don't understand why some of these cars end up with such ugly wheels.
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
Don't knock it until you've tried it. People are surprisingly happy with that vehicle; especially middle aged women.Alex wrote:Squint wrote:
The wheel choice is the least of the worries on that car lol.
But yeah, sometimes I don't understand why some of these cars end up with such ugly wheels.
'15 Mazda 3 iSport Hatch 6MT
'11 Ford Fiesta Hatchback SE 5MT
'14 Giant Escape City 24MT
'97 Honda Civic EX 4AT - Retired @ 184,001 mi
For Pony!
'11 Ford Fiesta Hatchback SE 5MT
'14 Giant Escape City 24MT
'97 Honda Civic EX 4AT - Retired @ 184,001 mi
For Pony!
Re: noob5,000,000's 1986 Mazda RX7, the clean one from Texas
Oh yeah, I have no idea how it drives (which might be awesome). I was just commenting on the way it looks (which is definitely NOT awesome ).